Kinetic Study of the Selective Hydrogenation of Acetylene over Supported Palladium under Tail-End Conditions

Selective Hydrogenation of Acetylene over Palladium in Ultra High Vacuum

Under ultra-high-vacuum conditions, precoverage of a palladium(ll1) surface with hydrogen does not affect either the kinetics or the extent of acetylene uptake at 175 K. The subsequent reactive behavior of the system is however radically altered. Benzene formation is strongly suppressed, the transformation of adsorbed acetylene to another species (@-phase) is enhanced, and the yield of ethylene...

A DFT + U study of acetylene selective hydrogenation over anatase supported PdaAgb (a + b = 4) cluster.

It is well known that the addition of Ag into Pd can promote the selectivity of acetylene hydrogenation to ethylene, and early theoretical studies focus on ideal single crystal model catalysts, so it is worth studying relatively realistic catalyst models, such as metal oxide supported PdAg systems. In this work, the reaction mechanisms for acetylene selective hydrogenation on the anatase TiO2(1...

An Egg-Shell Pd-Ag/ α -Al 2 O 3 Catalyst for Tail-End Acetylene Selective Hydrogenation

Palladium Gallium Intermetallic Compounds for the Selective Hydrogenation of Acetylene Part I: Preparation and Structural Investigation Under Reaction Conditions

15 August 2008 Abstract The intermetallic compounds PdGa and Pd3Ga7 are introduced as selective catalysts for the hydrogenation of acetylene. Single phase PdGa and Pd3Ga7 can readily be prepared by the appropriate thermal treatment of the stoichiometric mixtures of the corresponding elements. The initial low surface areas of the as-prepared materials can be increased by careful mechanical treat...

Predicting Kinetic Parameters of Acetylene Hydrogenation Reaction Via Optimization Techniques

In this study simulation and optimization of an industrial acetylene hydrogenation reactor was studied. Three well known kinetic models were used for a nearly similar catalyst to predict the industrial data. Due to the complexity of the reactions, none of the offered kinetic models could be considered as an exact kinetic model and it is necessary to determine the kinetic parameters. One of the ...