Kinetic study of pyrolysis of high?density polyethylene (HDPE) waste at different bed thickness in a fixed bed reactor

Control of a Fluidized Bed Polyethylene Reactor

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

Pressurised pyrolysis of Miscanthus using a fixed bed reactor.

Miscanthus x giganteus was pyrolysed, in a fixed bed reactor in a constant flow of dinitrogen gas, at a rate of 13°C/min from ambient to 550°C, then held for 25 min at this temperature. The pressures employed ranged from atmospheric to 26 bar. The major compounds identified in the bio-oil were water, phenol, and phenol derivatives. The water contents impact on the usefulness of the bio-oil as a...

Modeling and Performance of Waste Tires as Media in Fixed Bed Sequence Batch Reactor

Introduction: The modeling aims to simulate or optimize a process in physical, chemical or biological environments and the derived model will provide a considerable assistance to generate data and predict unknown condition, in case of sufficient suitability. Unsuitable disposal and elimination of waste tires have polluted the environment and human life areas, it also have caused removal of a hu...

control of a fluidized bed polyethylene reactor

in present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. a double active sites model for ziegler-natta catalysts is used for simulation of polymerization reaction. hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with differentiall...

Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor