Kinetic Modeling on Nozzle Clogging During Steel Billet Continuous Casting
نویسندگان
چکیده
منابع مشابه
SUBMERGED ENTRY NOZZLE CLOGGING DURING CONTINUOUS CASTING OF Al-KILLED STEEL
F. Tehovnik, J. Burja, B. Arh, Institute of metals and technology, Ljubljana, Slovenia, M. Knap, University of Ljubljana, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia Nozzle clogging is a common problem in the production of continuously cast Al-killed steels. Clogging occurs when there are solid inclusions in molten steel at casting temperatures. SENs (Submerged entry nozzle...
متن کاملPhysical Modeling of Steel Delivery during Thin Slab Continuous Casting
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...
متن کاملClogging in Continuous Casting Nozzles
Nozzle clogging is a serious productivity and quality problem in continuous casting. This work reviews the causes, effects, and solutions to clogging in continuous casting nozzles. The results of a one-dimensional, steady state analysis of the heat loss from the molten steel stream through the nozzle wall are discussed. The analyses show that steel may freeze within the clog matrix for a relati...
متن کاملphysical modeling of steel delivery during thin slab continuous casting
a full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (sen) was constructed. on the basis of the dimensionless reynolds and froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. in order to determine the optimum ope...
متن کاملMathematical Modeling of Heat Transfer for Steel Continuous Casting Process
Heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. A heat transfer and solidification model is described for the continuous casting of steel slabs. The model has been established on the basis of the technical conditions of the slab caster in the con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2010
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.50.712