Kinetic and ecotoxicological evaluation of the direct orange 26 dye degradation by Fenton and solar photo-Fenton processes

Oxidation of commercial reactive azo dye aqueous solutions by the photo-Fenton and Fenton-like processes

This paper evaluates the degradation of two azo reactive dyes, C.I. Reactive Yellow 84 (RY84) and C.I. Reactive Red 120 (RR120) by photo-Fenton and Fenton-like oxidation. All experiments were performed on a laboratory scale set-up. The effects of different reaction parameters such as initial pH, contact time, effect of light and hydrogen peroxide concentrations on the oxidation of the dye aqueo...

Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism

Fenton and solar photo-Fenton processes for the removal of chlorpyrifos insecticide in wastewater

The degradation of chlorpyrifos in water by Fenton (H2O2/Fe 2+) and solar photo-Fenton (H2O2/Fe 2+/solar light) processes was investigated. A laboratory-scale reactor was designed to evaluate and select the optimal oxidation condition. The degradation rate is strongly dependent on pH, temperature, H2O2 dosing rate, and initial concentrations of the insecticide and Fe 2+. The kinetics of organic...

Using Central Composite Experimental Design to Optimize the Degradation of Real Dye Wastewater by Fenton and Photo-fenton Reactions

USING CENTRAL COMPOSITE EXPERIMENTAL DESIGN TO OPTIMIZE THE DEGRADATION OF REAL DYE WASTEWATER BY FENTON AND PHOTO-FENTON REACTIONS Francesc Torrades* and Julia García-Montaño (1) Departament d’Enginyeria Química, ETSEIA de Terrassa, Universitat Politècnica de Catalunya, C/Colom 11, E-08222, Terrassa (Barcelona) Spain. (2) LEITAT Technological Center, Environment R&D Department, C/Innovació, 2,...

Mineralization of hetero bi-functional reactive dye in aqueous solution by Fenton and photo-Fenton reactions.

This study focused on the advanced oxidation of the hetero bi-functional reactive dye Sumifix Supra Yellow 3RF (CI Reactive Yellow 145) using dark Fenton and photo-Fenton conditions in a lab-scale experiment. A 2(3) factorial design was used to evaluate the effects of the three key factors: temperature, Fe(II) and H2O2 concentrations, for a dye concentration of 250 mg L(-1) with chemical oxygen...