Key Analysis of Design and Numerical Simulation for Aluminum Alloy Impeller Low-pressure Casting Mold
نویسندگان
چکیده
Abstract It is of great practical value to complete the low-pressure casting aluminum alloy impeller in current development process. In research, it necessary focus on factory realization and use produce impellers, so that castings with compact structure meeting performance requirements can be obtained. Compared other methods, itself, as a precision method, cast metal solution lower pressure application The filled solidified under certain pressure, Pro / Engineer used design mold for impeller, MAGMASOFT carry out filling solidification process impeller. Through numerical simulation, we accurately predict defects castings, optimize scheme pressure-time parameters according prediction results.
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولEVALUATION OF PRESSURE EFFECT ON HEAT TRANSFER COEFFICIENT AT THE METAL- MOLD INTERFACE FOR CASTING OF A356 AL ALLOY
Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...
متن کاملA Study for Analyzing Effects of Design Parameters in the Sand Casting Process of Aluminum Alloy
The use of aluminum alloys are of significant use in industry. Studying of design parameters of such products is important as not much work has been done for optimizing it. The generic formulation involves the flow, velocity, continuity fluid dynamics and shape related issues. The time for filling the mould and shape factor also play major role in performance of the casting process. In this pap...
متن کاملAIR PRESSURE SIMULATION IN CASTING MOLDS
During mold filling, molten metal can only advance as quickly as the air inside thecavity is expelled. In this work an analytical model describing air flow is developed based on aincompressible flow theory. Air pressure has serious effects upon the filling behaviour such assurface profile and filling time. In this work a new mathematical model is proposed for calculationthe air pressure during ...
متن کاملThe Effect of Dewaxing and Burnout Temperature in Block Mold Process for Copper Alloy Casting
The main objective of this research is to investigate the effect of dewaxing and burnout temperature on the quality of copper alloy casting produced by a low cost block mold that has been developed. In the molding process, two types of silica sand which contains 97.9% silica (SiO2) and 97.2% silica have been used as a refractory material with POP served as a binder. Several mold formulations co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2338/1/012070