Kaufman-type low-energy ion source.
نویسندگان
چکیده
منابع مشابه
LOW-ENERGY-ION ENHANCED DIFFUSION AT THE SURFACE OF METALS
Radiation enhanced diffusion at the surface of metals has been observed and studied for low-energy nitrogen ions at the surface of copper. The displacement of the target atoms during irradiation creates vacancies and other defects near the surface, thus enhancing the diffusion of implanted materials toward the surface and also into the solid. The mechanism has been studied here by a specia...
متن کاملMicrowave Ion Source for Low Charge State Ion Production
The Plasma and Ion Source Technology Group at LBNL have developed a microwave ion source. The source consists of a stainless-steel plasma chamber, a permanent-magnet dipole structure and a coaxial microwave feed. Measurements were carried out to characterize the plasma and the ion beam produced in the ion source. These measurements included current density, charge state distribution, gas effici...
متن کاملLow - power magnetized microdischarge ion source
The authors report on the design and operation of a magnetized microdischarge ion source. The discharge is a coaxial E B configuration with a closed-electron drift. Conditions are selected such that the ions are nonmagnetized and the electrons strongly magnetized. The operating characteristics of this ion source are studied in the 10–40 W power range, generating a total ion current as high as 0...
متن کاملlow-energy-ion enhanced diffusion at the surface of metals
radiation enhanced diffusion at the surface of metals has been observed and studied for low-energy nitrogen ions at the surface of copper. the displacement of the target atoms during irradiation creates vacancies and other defects near the surface, thus enhancing the diffusion of implanted materials toward the surface and also into the solid. the mechanism has been studied here by a special met...
متن کاملApplication of a Pulsed , RF - driven ) Multicusp Source for Low Energy Plasma Immersion Ion Implantation
The multicusp ion source has the capability of producing large volumes of uniform, quiescent, high density plasmas. Due to the versatility of the multicusp source, a plasma chamber suited for plasma immersion ion implantation (PIII) was readily constructed. Conventional PIII pulses the bias voltage applied to the substrate which is immersed in a CW mode plasma. However, in the interest of findi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1990
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.33.879