Karışmaz PMMA/PS harmanlarının optik özelliklerine uyumlulaştırıcı etkisi

Sabit Mıknatıslı Disk Motorlarda Mıknatıs Kaykı Etkisi

In this paper, one of the main cogging torque minimization methods, magnet skew, is examined in detail for Axial Flux Permanent Magnet (AFPM) disc motor. Various magnet skewing methods, types, and effects on the machine performance are also investigated using 3D Finite Element Analysis. The results are compared with a reference AFPM motor, and the improvements on cogging torque component are de...

Sürtünme Karıştırma Kaynağının Yaşlandırılabilir Parçalar Üzerinde Etkisi

In this study, age hardenable material Aluminum alloy Al-7075-T6 (aged) was investigated for weldability. Al-7075-T6 plates were subjected to Al-7075-0 heat treatment and were joined with different welding parameters by means of friction stir welding method. After Joining, the parts which were subjected to tensile and bending tests were examined. As a result of the studies, it was observed that...

Yazilim Gelistirmede Erken Asamalarda Toplanan Verinin Hata Tahmini Performansina Etkisi

Defectiveness of the software can be seen as one of the most important factors that address software quality. Software defect prediction models enable to observe the defectiveness of the software as well as to estimate the forward looking trend of defects. Most defect prediction models are built according to the coding phase based metrics. Therefore, chances for taking preventive actions early ...

GaAs Komponenten der Integrierten Optik für die externe Modulation in optischen Kommunikationssystemen

The improvements of the optical single-mode fiber and the progress in semiconduetor technology, especially in the domain of diode lasers with emission wavelengths in the near IR (1.3/rni 1.6um) allow for the rapidly growing data transmission rates in optical communication Systems. High demands are made on the transmitters, the reeeivers and the transmitting media at data rates of several Gbit/s...

OPTIK UNIVERSITÄT STUTTGART annual report 2 0 1 5 / 2 0 1 6