Ka-band planar slotted waveguide array based on groove gap waveguide technology with a glide-symmetric holey metasurface
نویسندگان
چکیده
منابع مشابه
designing and simulation of a wide-band mono-pulse slotted waveguide antenna array
in this paper, a resonant slotted waveguide array antenna with circular boundary has been designed and simulated for mono-pulse airborne radar applications. the antenna parameters are:11% bandwidth in x-band (8.6-9.6ghz),vswr < 2, 38dbi directivity, sidelobes level of - 20db and 3-db beam-widths of 2.1degree. to design this antenna, it is divided into short sections (sub-arrays) each with a uni...
متن کاملGroove Gap Waveguide (GGW) H-plane Horn Antenna and a Method for Its Back lobe Suppression
recently a new structure called groove gap waveguide (GGW) is introduced to implement low loss microwave component devices especially for millimeter wave applications. This paper presents a new type of H-plane horn antenna making use of this new technology in which backward radiation is significantly suppressed by introducing a high impedance surface at the antenna aperture. The high impe...
متن کاملA Wideband Slotted Waveguide Antenna Array for Sar Systems
Possibilities for the extension of the operational frequency band of slotted waveguide antennas are studied. It is shown that by using both conventional longitudinal slots and subarraying techniques it is possible to reach the relative bandwidth of about 15%. This result is illustrated by the development of a novel slotted waveguide antenna for high-resolution SAR applications. The antenna oper...
متن کاملA COMPACT Ka-BAND BROADBAND WAVEGUIDE- BASED TRAVELING-WAVE SPATIAL POWER COM- BINER WITH LOW LOSS SYMMETRIC COUPLING STRUCTURE
A compact Ka-band broadband waveguide-based travelingwave spatial power combiner is presented. The low loss micro-strip probes are symmetrically inserted into both broadwalls of waveguide, quadrupling the coupling ways but the insertion loss increases little. The measured 16 dB return-loss bandwidth of the eight-way back-toback structure is from 30 GHz to 39.4 GHz (more than 25%) and the insert...
متن کاملEtched ring absorbing waveguide filter based on a slotted waveguide antenna response
A cascade of resistively loaded etched rings in waveguide is proposed to act as the load in a balanced FMCW Reflected Power Canceller topology using a slotted waveguide array antenna. A synthesis technique using derived equivalent circuit models, is presented and tested.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2021
ISSN: 2045-2322
DOI: 10.1038/s41598-021-88054-5