Ka-band Microstrip Antenna Fed Circular Polarized Horn Array Antenna Design
نویسندگان
چکیده
منابع مشابه
Design of Circular Polarized Microstrip Patch Antenna for L Band
In this paper, we share our experience of designing a circularly polarized square patch antenna at L band. The antenna is designed using a relatively cheap substrate FR-4 with permittivity r = 4:4 and loss tangent tan = 0:02. The antenna has a gain of 5dB. Simulated response shows that the designed antenna has an input impedance(Zin) of 50 approximately. An efficiency of 65% is obtained for ...
متن کاملKa Band Transmit Antenna Array
Active antenna arrays working at higher frequencies result in higher packaging densities. The antenna array under consideration operates at about 30 GHz and will be installed in an aircraft. Commercially available power amplifiers at these frequencies have an efficiency of typically 20 %, which results in high amounts of dissipated heat for the required high radiated power. The dissipated power...
متن کاملDual Band Dual Polarized Slot Cut modified Circular Microstrip Antenna
A new broadband and dual band circular slot cut modified circular microstrip antenna is analyzed and proposed. The parametric study to analyze the effects of circular slot which realizes broader bandwidth is presented. The circular slot creates two additional resonant modes near the fundamental TM11 mode resonance frequency of the equivalent circular patch and yields bandwidth of 202 MHz (8%). ...
متن کاملCircular Patch Microstrip Array Antenna for KU-band
This paper present a circular patch microstrip array antenna operate in KU-band (10.9GHz – 17.25GHz). The proposed circular patch array antenna will be in light weight, flexible, slim and compact unit compare with current antenna used in KU-band. The paper also presents the detail steps of designing the circular patch microstrip array antenna. An Advance Design System (ADS) software is used to ...
متن کاملWide-Band T-Shaped Microstrip-Fed Twin-Slot Array Antenna
Yong-Woong Jang 33 A numerical simulation and an experimental implementation of T-shaped microstrip-fed printed slot array antenna are presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the finite-difference time-domain (FDTD) method. The dependence of design parameters on the bandwidth characteristics is investigated. The measured ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of IKEEE
سال: 2013
ISSN: 1226-7244
DOI: 10.7471/ikeee.2013.17.2.140