Joining of TiAl alloys using Ni/Al multilayers
نویسندگان
چکیده
منابع مشابه
Microstructures and Mechanical Properties of NiAl-(Cr) and TiAl-(Cr) Intermetallic Alloys
The oxidation resistant light weight aluminides: NiAl and TiAl with ordered
متن کاملJoining of TiAl to Steel by Diffusion Bonding with Ni/Ti Reactive Multilayers
Dissimilar diffusion bonds of TiAl alloy to AISI 310 stainless steel using Ni/Ti reactive multilayers were studied in this investigation. The Ni and Ti alternating layers were deposited by d.c. magnetron sputtering onto the base materials, with a bilayer thickness of 30 and 60 nm. Joining experiments were performed at 700 and 800 ̋C for 60 min under pressures of 50 and 10 MPa. The effectiveness...
متن کاملPoint Defects in Nial Alloys under Pressure
We investigate the eeect of elevated pressures on the point defect ther-modynamics in NiAl alloys. A particular motivation for this study is due to the expected elimination of structural vacancies on the Al-rich side at high pressure. We employ the density functional theory to compute point defect energies as a function of pressure, which are in turn used as input to the Wagner-Schottky model. ...
متن کاملATOMISTIC STUDIES OF JOGGED SCREW DISLOCATIONS IN y-TIAL ALLOYS
The behavior of jogged screw dislocations in y-TiAl alloys has been investigated with large-scale molecular dynamics (MD) simuIations. We find a new mechanism for formation of pinning points in jogged screw dislocations. We also find that the critical height for the jogs in the +[i10] directions on the (001) plane to move nonconservatively is between 3ro and 4r0, where ro is the nearest neighbo...
متن کاملThermal-cycling creep of g-TiAl-based alloys
In two-phase TiAl-based alloys, the coexisting 2 and phases exhibit a thermal expansion mismatch, so that increased creep rates during thermal cycling may be expected. Creep deformation of two g-TiAl-based alloys was investigated during thermal cycles between 900 and 300 or 350 C with applied tensile stresses of 32.5 or 37.0 MPa. Measured thermal cycling creep rates were compared with isotherma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2009
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927609990821