Joining Behavior of YSZ Ceramics to Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub>-SiO<sub>2</sub>-R<sub>2</sub>O and Al<sub>2</sub>O<sub>2</sub>-ZrO<sub>2</sub>-SiO<sub>2</sub>-La<sub>2</sub>O<sub>3</sub>-R<sub>2</sub>O Glass Systems

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior

Microporous Calcium Titanium Phosphate glass-ceramics have many uses in high-tech industries. For example, they have applications in catalysts industry. In this study, different molar percentages of alumina were added to a glass with P2O5 30, CaO 45, TiO2 25 (mol%) composition. The samples were melted at 1350°C and crystallization heat treatment was performed on...

متن کامل

CRYSTALLIZATION AND SINTERABILITY BEHAVIOR OF BIORESORBABLE CaO-P2O5-Na2O-TiO2 GLASS CERAMICS FOR BONE REGENERATION APPLICATION

Abstract:Some types of glass and glass ceramics have a great potential for making bone tissue engineering scaffolds, drug carrier and bone cements as they can bond to host bone, stimulate bone cells toward osteogenesis, and resorb at the same time as the bone is repaired. Calcium phosphate glass ceramics have very attractive properties that allow them to use in bone tissue engineering. Calcium ...

متن کامل

Joining Ceramics to Metals using Metallic Foam

A general method for brazing ceramics to metals using a compliant metallic foam as a buffer layer has been developed. Using stainless steel foams, bonds between alumina and 316 stainless steel with shear strengths up to 33 MPa have been achieved. The resultant ductility enhances the resistance of the joint to thermal cycling; AlN-Inconel 600 bonds exhibited good thermal shock resistance. Alumin...

متن کامل

Sintering Behavior and Properties of Iron-Rich Glass-Ceramics

Iron-rich glass-ceramics were obtained by the sintering of two glass powders, labeled G1 and G2, at heating rates of 5° and 20°C/min followed by an isothermal step in the 850°–1050°C temperature interval. The sintering process was evaluated by the linear shrinkage; the closed porosity was estimated by density measurements; the structure and the morphology of the glass ceramics were observed by ...

متن کامل

Processing and Characterization of Nanocrystalline Mica Glass-Ceramics

In order to fabrication of transparent glass-ceramics with Li-mica nano crystals, the glasses with chemical composition of 94.9 mass% Li(1+x)Mg3AlSi3(1+x)F2 (x=0.5) with 5.1 mass% MgF2 were crystallized. The glasses were fabricated via the conventional melt-quenching technique. Mica crystals were precipitated in the glass phase by later heat treatment. Glass samples had glass transition tempera...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Korean Ceramic Society

سال: 2015

ISSN: 1229-7801

DOI: 10.4191/kcers.2015.52.1.19