ITER CS model coil and CS insert test results

Analysis of the Current Distribution in the ITER CS-Insert Model Coil Conductor by Self Field Measurements

Non-uniformities in the paths of the currents in a Cable-In-Conduit Conductor (CICC), resistive or inductive, will result into an unbalanced current distribution. The current nonuniformity may affect the performance of a magnet system and it is therefore essential to evaluate this phenomenon. The current distribution in the Central Solenoid Insert Coil (CSIC) from the Central Solenoid Model Coi...

Determining TG-43 brachytherapy dosimetry parameters and dose distribution for a 131Cs source model CS-1

Background: Monte Carlo determination of TG-43 brachytherapy dosimetry parameters and dose distribution calculation for 131Cs source model CS-1 are presented in this study. Materials and Methods: The dose distribution was calculated around the 131Cs Model CS-1 located in the center of 30 cm ×30 cm ×30 cm water, and soft tissue phantoms cube using MCNP code by Monte Carlo method. The percentage ...

CS 1951-k and CS 2951-z: Homework 8

Due Date: Tuesday, April 18, 2017. 9:00 PM. We encourage you to work in groups of size two. Each group need only submit one solution. Your submission must be typeset using LATEX. You must submit both the LATEX source and the rendered PDF. LATEX files without an accompanying PDF will not be graded. Likewise, PDF files without accompanying LATEX source will not be graded. Use the handin script to...

CS 1951-k and CS 2951-z: Homework 3

Wetting transition behavior of Xe on Cs and Cs/graphite

Calculations are presented of the adsorption behavior of Xe films on two different surfaces. One is bulk Cs metal; the other is a graphite surface, covered by a monolayer of Cs. With data obtained from grand canonical Monte Carlo simulations, it is found that a Xe wetting transition occurs on the Cs monolayer within the temperature interval 190 to 200 K. On the Cs metal surface, negligible adso...