منابع مشابه
Tritium Modeling for Iter Test Blanket Module
HCPB (Helium Cooled Pebbles Bed) Test Blanket Model (TBM) is based on solid breeder. Tritium has to be extracted using Helium purge gas flowing through breeder pebbles bed. He-stream must be cooled down and processed and all these steps are carried out in TES (Tritium Extraction System). A modeling work has been performed to study the behavior of the TES of the HCPB TBM and for Molecular Sieve ...
متن کاملBending-Strain Test Results of ITER Nb3Sn Wires and Preliminary Model Analysis
Bending effects on Nb 3 Sn wires have been investigated to understand the critical current degradation of large Nb 3 Sn superconducting cables, such as the ITER conductors. Characterizations of the critical currents of various Nb 3 Sn wires were carried out by a previously reported pure-bending strand test device using the 20 T, 195 mm Bitter magnet at the National High Magnetic Field Laborator...
متن کاملOPERATION AND CONTROL OF ITER PLASMAS ITER JOINT CENTRAL TEAM, ITER HOME TEAMS AND ITER DISRUPTION, PLASMA CONTROL AND MHD EXPERT GROUP Presented by John Wesley International Thermonuclear Experimental Reactor (ITER) Joint Central Team
Features incorporated in the design of the International Thermonuclear Experimental Reactor (ITER) tokamak and its ancillary and plasma diagnostic systems that will facilitate operation and control of ignited and/or high-Q DT plasmas are presented. Control methods based upon straight-forward extrapolation of techniques employed in the present generation of tokamaks are found to be adequate and ...
متن کاملAnalysis and interpretation of the full set (2000–2002) of TCS tests in conductor 1A of the ITER Central Solenoid Model Coil
The full set of TCS measurements performed during 2000–2002 on conductor 1A of the ITER Central Solenoid Model Coil (CSMC) of the International Thermonuclear Experimental Reactor (ITER) is analysed with the extensively validated M&M code. Under the assumptions of uniform strand properties and uniform current distribution among strands, the performance of this ‘‘average’’ strand in the cable is ...
متن کاملOverview of diagnostics on ITER neutral beam test facility
ITER operation relies on heating neutral beam injectors (HNB) based on negative ion deuterium beams accelerated at 1 MeV, with up to one hour 17 MW power, uniform intensity and low divergence. A neutral beam test facility is being built at Consorzio RFX to demonstrate the feasibility of a prototype injector with such demanding specifications and to optimize its performances. It comprises SPIDER...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Applied Superconductivity
سال: 2016
ISSN: 1051-8223,1558-2515
DOI: 10.1109/tasc.2016.2517322