Isothermal Transformation Behavior of 10% Cr Heat Resistant Steel Fabricated by Centrifugal Casting Process
نویسندگان
چکیده
منابع مشابه
Mathematical Modeling of Heat Transfer for Steel Continuous Casting Process
Heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. A heat transfer and solidification model is described for the continuous casting of steel slabs. The model has been established on the basis of the technical conditions of the slab caster in the con...
متن کاملmathematical modeling of heat transfer for steel continuous casting process
heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. a heat transfer and solidification model is described for the continuous casting of steel slabs. the model has been established on the basis of the technical conditions of the slab caster in the continuou...
متن کاملProcess Capability Analysis of a Centrifugal Casting Process
The concept of process capability was proposed in early 1970 with the introduction of ‘capability ratio’ by Juran, a world known quality expert. Thereafter almost 40 years have been passed and many indices such as Cp, Cpk and Cpm were developed for measuring process performance. However, many researchers, for example, Kotz and Johnson [1-2] raised concerns about the application of the diversifi...
متن کاملSimulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel
The aim of the present research is to simulate the heat treatment process of the autogenous grinding (AG) shell liner of Cr-Mo steel in different quenching media (still air, air blowing, oil and water) using ABAQUS software, in order to calculate the cooling curves. In this regard, the microstructure and hardness for each arbitrary point within the mill liner's bulk could be predicted based on ...
متن کاملEffect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-velocity Oxyfuel Processes
In this study, the effect of surface morphologies on the isothermal oxidation behavior of MCrAlY coatings fabricated by high-velocity oxyfuel (HVOF) processes was investigated. To do so, free standing coatings with as-sprayed and polished surfaces were isothermally oxidized at 1050°C. The thickness of the bond coat was approximately 380μm. The Ra of the as-sprayed and polished surfaces were 6.4...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society for Heat Treatment
سال: 2014
ISSN: 1225-1070
DOI: 10.12656/jksht.2014.27.2.72