IRRIGAÇÃO POR GOTEJAMENTO SUBSUPERFICIAL E PULSOS NA PRODUÇÃO DE TOMATE DE MESA / SUBSUPERFICIAL DRIP IRRIGATION AND PULSES DRIP IRRIGATION TOMATO PRODUCTION

Effects of salinity and irrigation water management on soil and tomato in drip irrigation

In this research, the effects of irrigation with saline and fresh water through drip irrigation method and using two irrigation management strategies: M1, M2 (M1 is irrigation with fresh water in alternative with saline water, M2 is saline water in first half time of each irrigation event and fresh water in the second half), on the yield, water productivity (WP), soil salinity, plant height...

Using Irrigation to Manage Weeds: A Focus on Drip Irrigation

Advantages and Disadvantages of Subsurface Drip Irrigation

The advantages and disadvantages of subsurface drip irrigation (SDI) as compared to alternative irrigation systems are conceptually discussed. Each category (advantages and disadvantages) is subdivided into three groups: 1) Water and soil issues; 2) Cropping and cultural practices, and 3) System infrastructure issues. The adaptation and adoption of SDI systems into diverse cropping systems, geo...

Advantages and Disadvantages of Subsurface Drip Irrigation

Subsurface drip irrigation (SDI) applies water directly to the crop root zone using buried polyethy­ lene tubing, also known as a dripline, dripperline, or drip tape (Figure 1). Driplines come in varying diam­ eters and thicknesses in order to maintain acceptable irrigation uniformity for different field lengths. Smaller diameter driplines are used when short lateral lengths are required. As la...

Comparison of Subsurface Drip Irrigation Uniformity Designs on Cotton Production

One of the biggest obstacles to the widespread adoption of subsurface drip irrigation (SDI) on the High Plains of Texas is the high cost of initial installation. In some cases, SDI costs can be reduced if systems are designed using lower irrigation uniformity standards. The question becomes “what is the cost in terms of cotton lint yield of lowering the uniformity standards for SDI design?” A S...