Irradiation Effects on Alumina Ceramics for Vacuum Duct.
نویسندگان
چکیده
منابع مشابه
Mullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملAddition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior
Microporous Calcium Titanium Phosphate glass-ceramics have many uses in high-tech industries. For example, they have applications in catalysts industry. In this study, different molar percentages of alumina were added to a glass with P2O5 30, CaO 45, TiO2 25 (mol%) composition. The samples were melted at 1350°C and crystallization heat treatment was performed on...
متن کاملSurface Contamination of Alumina Ceramics by Carbon
Article history: Received: 01.05.2016. Received in revised form: 25.07.2016. Accepted: 06.09.2016. This study presents the results of investigating the cause of contamination of aluminum oxide ceramics (Al2O3) in the form of brown colored stain. Contaminated ceramic surfaces were examined with the scanning electron microscope (SEM) equipped with the Energy Dispersive Spectrometer (EDS). The res...
متن کاملHertzian Contact Damage in Porous Alumina Ceramics
A study has been made of Hertzian contact damage in compressive shear stress field beneath the contact area. The observed microcrack density increases with grain size, porous and dense liquid-phase-sintered aluminas. Indentation stress–strain curves show increasing nonlinearity as the implying a threshold microstructural scale for crack initiation. In contrast, the micromechanisms controlling f...
متن کاملEffects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics.
This study evaluated the effect of alumina-blasting and three commercial adhesive primers on the shear bond strength of a dual-cured resin luting agent to zirconia ceramics. Two different-sized zirconia ceramic specimens were treated with or without alumina-blasting and then treated with one of three adhesive primers. Subsequently, specimens were cemented together with Linkmax HV (GC). Half of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 2001
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.44.131