Iosipescu Shear Test of Composite Joint Specimens in Tensile Loading
نویسندگان
چکیده
منابع مشابه
Wrinkling Simulation of Membrane Structures under Tensile and Shear Loading
This paper presents a detailed Finite Element Analysis study of the formation and evolution of wrinkle pattern that observed in stretched thin membranes. The model problem is set up under the various load conditions. As a precondition for wrinkling, development of compressive stresses in the transverse direction is found to depend on both the length-to-width aspect ratio & thickness of the rect...
متن کاملThermomechanical Studies in Glass/Epoxy Composite Specimen during Tensile Loading
This paper presents the results of thermo-mechanical characterization of Glass/Epoxy composite specimens using Infrared Thermography technique. The specimens used for the study were fabricated in-house with three different lay-up sequences and tested on a servo hydraulic machine under uni-axial loading. Infrared Camera was used for on-line monitoring surface temperature changes of composite spe...
متن کاملDevelopment of a New Method for T-joint Specimens Testing under Shear Loading
Nonstandard tests are necessary for analyses and verification of new developed structural and technological solutions with application of composite materials. One of the most critical primary structural parts of a typical aerospace structure is T-joint. This structural element is loaded mainly in shear, bending, peel and tension. The paper is focused on the shear loading simulations. The aim of...
متن کاملDetermination of shear strength of unidirectional composite materials with the Iosipescu and 10 o-axis shear tests
The purpose of this research was to determine the shear strength of a unidirectional carbon-®bre/epoxy composite by means of the 10 o-axis and 0 Iosipescu specimens subjected to shear. Detailed non-linear ®nite-element computations of these two tests were conducted, taking into account the actual non-linear material behavior of the composite. The tests were compared in terms of stresses and st...
متن کاملExperimental Study of the Nugget Diameter Effect on Tensile-Shear Strength in AISI 1008 Spot Welding Specimens
The Spot welding is widely used for joining thin sheets in different industries; such as automotive industry. This method of welding is very easy to automate and maintain. In this study, the effect of nugget diameter on the tensile-shear strength of the spot welding joints was investigated. The specimens were manufactured from AISI 1008 HR sheets with 1.0 mm thickness. The eight different elect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Composites Letters
سال: 1995
ISSN: 2633-366X,2633-366X
DOI: 10.1177/096369359500400402