Ion release characterization in phase separated borosilicate glass powders
نویسندگان
چکیده
منابع مشابه
Quantitative AFM analysis of phase separated borosilicate glass surfaces
Phase separated borosilicate glass samples were prepared by applying various heat treatments. Using selective chemical etching we performed AFM measurement on the phase separated glass surfaces. A quantitative roughness analysis allowed us to measure precisely the dependence of the characteristic size of the phase domains on heating time and temperature. The experimental measurements are very w...
متن کاملStructure of Rhenium-Containing Sodium Borosilicate Glass
A series of sodium borosilicate glasses were synthesized with KReO4 or Re2O7, to 10,000 ppm (1 mass%) target Re, to assess effects of large concentrations of rhenium on glass structure and fto estimate solubility of Tc, a radioactive component in low active waste nuclear glasses. Rhenium was used as a surrogate for Tc for laboratory testing, due to similarities in chemistry, ionic size, and red...
متن کاملProfile Control of a Borosilicate-Glass Groove Formed by Deep Reactive Ion Etching
Deep reactive ion etching (DRIE) of borosilicate glass and profile control of an etched groove are reported. DRIE was carried out using an anodically bonded silicon wafer as an etching mask. We controlled the groove profile, namely improving its sidewall angle, by removing excessively thick polymer film produced by carbonfluoride etching gases during DRIE. Two fabrication processes were experim...
متن کاملLiquid–liquid phase separation in alkali-borosilicate glass. An impedance spectroscopy study
We followed the first stages of liquid–liquid phase separation in an alkali-borosilicate glass by complex impedance spectroscopy at constant temperatures below and above the glass transition temperature, Tg. We found a new feature of the electrical conductivity behavior: at temperatures below Tg, the electrical conductivity, r, diminished with time, while above Tg, the electrical conductivity i...
متن کاملPressure Induced Densification and Compression in a Reprocessed Borosilicate Glass
Pressure induced densification and compression of a reprocessed sample of borosilicate glass has been studied by X-ray radiography and energy dispersive X-ray diffraction using a Paris-Edinburgh (PE) press at a synchrotron X-ray source. The reprocessing of a commercial borosilicate glass was carried out by cyclical melting and cooling. Gold foil pressure markers were used to obtain the sample p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Non-Crystalline Solids
سال: 2020
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2020.119934