Ion-Beam Etching Techniques in Uranium Metallography
نویسندگان
چکیده
منابع مشابه
Microscale Metallography Using Focused Ion Beam
Microstructural examination can provide a rich tapestry of information about the processing and application history of a metal component. For this reason, microstructural characterization is a fundamental tool for failure analysis of these components. To reduce costs and accommodate demands for smaller packaging, many applications currently use metallic components where the critical dimensions ...
متن کاملIon beam induced dry etching and possibility of highly charged ion beam
Dry etching techniques employing ion beam induced surface reaction and the possibility of highly charged ion beam in dry etching are described, and the preliminary work on dry etching of GaAs using highly charged ion (HCI) is also presented. In usual dry etching, total etch rate is a summation of the physical sputtering rate, the chemical etching rate, and the ion-induced chemical etching rate....
متن کاملReactive Ion Beam Etching of Large Diffraction Gratings
Large area Multilayer Dielectric (MLD) diffraction gratings are essential components for temporal pulse compression in high energy laser systems. MLD grating designs typically consist of a silica grating layer on top of a dielectric multilayer reflector. A reactive ion beam etching (RIBE) process using a gridded radio frequency (RF) ion source was developed to uniformly etch the silica grating ...
متن کاملEtching of graphene devices with a helium ion beam.
We report on the etching of graphene devices with a helium ion beam, including in situ electrical measurement during lithography. The etching process can be used to nanostructure and electrically isolate different regions in a graphene device, as demonstrated by etching a channel in a suspended graphene device with etched gaps down to about 10 nm. Graphene devices on silicon dioxide (SiO(2)) su...
متن کاملHyperthermal neutral beam etching
A pulsed beam of hyperthermal fluorine atoms with an average translational energy of 4.8 eV has been used to demonstrate anisotropic etching of Si. For 1.4 Hz operation, a room-temperature etch rate of 300 Å/min for Si~100! has been measured at a distance of 30 cm from the source. A 14% undercutting for room-temperature etching of Novolac-masked Si features was achieved under single-collision c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2009
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927609099279