Ion and Gas Nitriding Applied to Steel Tool for Hot Work X38CrMoV5 Nitriding Type: Impact on the Wear Resistance
نویسندگان
چکیده
منابع مشابه
Discharges in N2 flowing gas for steel surface nitriding
2014 Modelling of plasma reactors for steel surface nitriding has been achieved in discharge and postdischarge conditions of N2 flowing gas. Diagnostics and calculations have been focused on the N2(X, V) vibrational molecules and N atoms which are the most populated long living species. It has been demonstrated that these neutral active species produce steel surface nitriding with the same char...
متن کاملNanosized precipitates in H13 tool steel low temperature plasma nitriding
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning Elec...
متن کاملFormation of a hybrid coating by the use of plasma nitriding and hard chromium electroplating on the surface of H11 hot work tool steel
Abstract: Formation of a hybrid coating by the use of plasma nitriding and hard chromium electroplating on the surface of H11 hot work tool steel was investigated. Firstly, specimens were plasma nitrided at a temperature of 550 °C for 5 hours in an atmosphere of 25 vol. % H2: 75 vol. % N2. Secondly, electroplating was carried out in a solution containing 250 g/L chromic acid and 2.5 g/L sulp...
متن کاملThe Efficiency of Ion Nitriding of Austenitic
M. Ogórek, Z. Skuza, T. Frączek, Czestochowa University of Technology, Czestochowa, Poland The study examined layers were formed on the outer surface of austenitic stainless steel 304 under glow discharge conditions in the low-temperature and short-term ion nitriding. The outer layers analyzed in the work produced in parallel in the classical process of cathode and a novel method of “active scr...
متن کاملCombined effect of rapid nitriding and plastic deformation on the surface strength, toughness and wear resistance of steel 38CrMoAlA
The combined treatment of pressurized gas nitriding and cold rolling is proposed as a new approach to rapid preparation of a strong and tough nitrided layer for steel 38CrMoAlA. The microstructural characteristics and properties of the modified surface layer in comparison with those of the conventionally gas nitrided sample have systematically been evaluated. The results show that the hardness ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Sciences and Applications
سال: 2012
ISSN: 2153-117X,2153-1188
DOI: 10.4236/msa.2012.39093