Investigations on mechanical properties of Al6061-SiC nanocomposites fabricated via stir casting process
نویسندگان
چکیده
منابع مشابه
investigation of mechanical property and microstructure of nanocomposite az31/sic fabricated by friction stir process
the friction stir process (fsp) is a solid state process, which has been used to insert reinforcing particles into the structure of a material to create a composite with improved properties. magnesium is a light structural metal that is increasingly used in the aerospace and automobile industries. in this research, sic nanoparticles were added to az31 alloy using fsp in two overlaps of 100% and...
متن کاملEffects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding
This research developed new nanostructured Al–Fe3O4 composites via accumulative roll bonding (ARB). X-ray diffraction (XRD) analysis and field emission scanning electron microscopy were conducted to examine microstructural characteristics and particle distribution in the nanocomposites. Hardness and tensile strength tests were employed to examine their mechanical propertie...
متن کاملTheoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process
In this study, thermoplastic polyolefin elastomeric (TPO) nanocomposites were fabricated by friction stir processing. The effect of different pin geometries on clay dispersion and mechanical properties of the TPO nanocomposite reinforced with 3% wt nanoclay has been first investigated. The optimum pin geometry namely threaded cylindrical pin was then used to fabricate the nanocomposites contain...
متن کاملTribological behaviour of AA 5083/Micron and Nano SiC composites fabricated by ultrasonic assisted stir casting process
Metal Matrix composites (MMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence and other industries. MMCs are projected to significantly reduce the overall weight of the vehicle and aircraft while maintaining satisfactory structural strength. Micron and Nano-sized ceramic particle reinforced aluminum matrix composites fabricat...
متن کاملtheoretical models for prediction of mechanical behaviour of the pp/epdm nanocomposites fabricated by friction stir process
in this study, thermoplastic polyolefin elastomeric (tpo) nanocomposites were fabricated by friction stir processing. the effect of different pin geometries on clay dispersion and mechanical properties of the tpo nanocomposite reinforced with 3% wt nanoclay has been first investigated. the optimum pin geometry namely threaded cylindrical pin was then used to fabricate the nanocomposites contain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2021
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2020.05.172