Investigations on hydraulic cements from spent oil shale

Morphological investigations of fibrogenic action of Estonian oil shale dust.

A review of morphological investigations carried out to clarify the pathogenicity of industrial dust produced in the mining and processing of Estonian oil shale is given. Histological examination of lungs of workers in the oil shale industry taken at necropsies showed that the inhalation of oil shale dust over a long period (more than 20 years) may cause the development of occupational pneumoco...

Value Added Products from Oil Shale

Oil shale is more than an energy source. It is also a source for various valuable materials. These materials include pyridine, carbonate minerals, alumina, ammonium sulfate, phosphate, sulfur, uranium, vanadium, and zinc, to name a few, from which numerous value-added products can be manufactured. For example, catalysts are made from vanadium and zinc, while alumina is a widely used material fo...

Chemicals and Other Products from Shale Oil

Vaporization Parameters of Primary Pyrolysis Oil from Kukersite Oil Shale

The objective of this study was to obtain vapor pressure and heat of vaporization values of the less volatile heavy end of the Kukersite oil shale primary pyrolysis oil and therefore to have a quantitative insight into the vaporization ability of the oil during the pyrolysis process. The shale oil was produced via rapid pyrolysis in a laboratory scale reactor and collected in a solvent filled c...

Growth model for large branched three-dimensional hydraulic crack system in gas or oil shale.

Recent analysis of gas outflow histories at wellheads shows that the hydraulic crack spacing must be of the order of 0.1 m (rather than 1 m or 10 m). Consequently, the existing models, limited to one or several cracks, are unrealistic. The reality is 10(5)-10(6) almost vertical hydraulic cracks per fracking stage. Here, we study the growth of two intersecting near-orthogonal systems of parallel...