Investigations on densified beech wood for application as a swelling dowel in timber joints

Experiments on dowel-type timber connections

Dowel-type connections are commonly used in timber engineering for a large range of structural applications. The current generation of design rules is largely based on empiricism and testing and lacks in many parts a stringent mechanical foundation. This often blocks an optimized use of the connections, which is essential for the design of economically efficient structures. Moreover, it severel...

Limit analysis discussion of design methods for fracture of timber dowel joints loaded perpendicular to grain

Shrink-fitting and dowel welding in mortise and tenon structural wood joints

Shrink-fitting, a common bonding technique in metal assemblies, was used for mortise and tenon wood joints. The joints had considerable strength. Shrink-fitting yielded joint strengths comparable to those obtained by using several welded dowels. Increasing the number of welded dowels, however, produced joints of higher strength than those bonded just by shrink-fitting. Combining in the same joi...

Mechanical Behavior of Dowel-Type Joints Made of Wood Scrimber Composite

As a renewable building material with low embodied energy characteristics, wood has gained more and more attention in the green and sustainable building industry. In terms of material resource and physical properties, scrimber composite not only makes full use of fast-growing wood species, but also has better mechanical performance and less inherent variability than natural wood material. In th...

Bending Capacity of Middle Joints of Upholstered Furniture Frames

This study evaluates the edgewise bending moment capacity of the four most frequently used middle joints in the upholstered furniture frames. The research included the following joints: Mortise and Tenon, double Dowel, Corner Blocks and double Gusset Plates, designed in the form of middle joints and made of beech and poplar solid wood. The test results indicated that regarding the edgewise bend...