Investigations on bending condition for welded carbon steel pipe by high frequency induction heating.
نویسندگان
چکیده
منابع مشابه
Prospect of High-performance Welded Steel Bridge
The development of several grades of high-performance steel (HPS) with yield strengths of the order of 480 to 690 MPa (even more) with improved weldability, toughness and corrosion resistance have changed the scenario of fabrication of welded steel bridges for highway and rail bridge constructions. The HPS possesses the optimum combination of properties required to build cost-effective structur...
متن کاملCrystallographic Texture of Induction-welded and Heat-treated Pipeline Steel
The Charpy energy of the sample after heat–treatment was significantly higher than the as–welded sample when the V–notches were located 1 or 3 mm away from FL. However, when the V–notch was located on FL, the improvement in toughness from the heat treatment was not so obvious with no enhancement noted for the test temperature of −40 ◦C. Under this condition, the facets of the fracture surface a...
متن کاملFrequency Selectable Induction Heating Targets
This paper examines a scheme for developing frequency selectable induction heating targets for stimulating temperature sensitive polymer actuators. “Frequency selectable” implies that each target has a frequency at which it heats preferentially compared to other remaining targets. Single-turn conductors whose critical dimensions are small compared to their associated skin depth (over the freque...
متن کاملThe Effect of Multiple Bending of Wire on the Residual Stresses of High Carbon Steel Wires
R. Kruzel, M. Suliga, Czestochowa University of Technology, Czestochowa, Poland Steel tire cord, springs and rope wires belong to the group of metal products from which the low residual stresses are required. In this paper the eff ect of multiple bending of wire on residual stresses of high carbon steel wires has been assessed. It was found that the application of the multi-roller straightening...
متن کاملDevelopment of Ti-Coated Ferromagnetic Needle, Adaptable for Ablation Cancer Therapy by High-Frequency Induction Heating
To develop a novel ablation therapy for human solid cancer, the heating properties of a ferromagnetic carbon steel rod and a prototype Ti-coated needle using this carbon steel rod, were investigated in several high-frequency outputs at 300 kHz. In the former, the heating property was drastically different among the three inclination angles (θ = 0°, 45° and 90°) relative to the magnetic flux dir...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 1987
ISSN: 0288-4771
DOI: 10.2207/qjjws.5.389