Investigations of Pull-out Type Fracture of Fillet welds
نویسندگان
چکیده
منابع مشابه
Fracture Mechanics of the Microbond and Pull-out Tests
The properties of the fiber/matrix interface in composites have an influence on their overall performance. Common methods for studying the interface are micromechanical tests that load a single fiber/matrix interface to failure. Two popular tests are the microbond test [1] and the single-fiber, pull-out test [2]. In a microbond test a droplet of matrix is sheared off the fiber by pulling the fi...
متن کاملPredicting the Failure of Ultrasonic Spot Welds by Pull-out from Sheet Metal
Bin Zhou, M. D. Thouless, and S. M. Ward Department of Mechanical Engineering Department of Material Science and Engineering University of Michigan Ann Arbor, MI, 48109 Scientific Research Laboratory Ford Motor Company Dearborn, MI, 48124 Abstract A methodology for determining the cohesive facture parameters associated with pull-out of spot welds is presented. Since failure of a spot weld by pu...
متن کاملthe investigation of the relationship between type a and type b personalities and quality of translation
چکیده ندارد.
Experimental Investigations on the Pull-Out Behavior of Tire Strips Reinforced Sands
Waste tires have excellent mechanical performance and have been used as reinforcing material in geotechnical engineering; however, their interface properties are poorly understood. To further our knowledge, this paper examines the pull-out characteristics of waste tire strips in a compacted sand, together with uniaxial and biaxial geogrids also tested under the same conditions. The analysis of ...
متن کاملExperimental Study on Strength and Ductility of Underwater Fillet Welds in Repairing Offshore Steel Structures
Underwater wet welding is one of the most common repair measures for corroded offshore steel structures. Few studies have been carried out systematically concerned with mechanical properties of such welds, thus current design provisions rely heavily on limited experimental data on welds made underwater and design properties for corresponding welds made in air. This paper presents a series of ex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1956
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.25.94