Investigation studies involving wear-resistant ALD/PVD hybrid coatings on sintered tool substrates

Sintered hydroxyapatite ceramic for wear studies.

A sintered hydroxyapatite (HAP) ceramic for use in wear studies was prepared from a commercial tricalcium phosphate. The sintered HAP had physical properties close to those of human enamel. The coefficient of friction and wear of the sintered HAP ceramic as characterized by tangential force, track width, and surface failure data, approximated those of human enamel.

Self-lubricating, low-friction, wear-resistant Al-based quasicrystalline coatings

After gas atomization, a quasicrystalline powder based on aluminium was used to prepare a thick coating by high-velocity oxygen-fuel flame torch spraying. This layer was deposited on top of a bond-coat layer on a steel plate. A post-spraying annealing treatment turned the two layers to their stable state, a γ-brass crystal and an icosahedral quasicrystal, respectively. The projection parameters...

Btanoscale Boehmite Filler for Corrosion- and Wear-resistant Polyphenylenesulfide Coatings

Hybrid Learning for Tool Wear Monitoring

In automated manufacturing systems such as flexible manufacturing systems (FMSs), one of the most important issues is the detection of tool wear during the cutting process. This paper presents a hybrid learning method to map the relationship between the features of cutting vibration and the tool wear condition. The experimental results show that it can be used effectively to monitor the tool we...

PVD coatings on aluminium substrates

It is well known that aluminium is today the most widely used metallic material besides steel. The mechanical characteristics of aluminium offer an increasing application field, especially where lightweight constructions are required. The demands for improved characteristics such as higher strength and greater durability are achieved by the development of new aluminium alloys. Continuous effort...