Investigation on selection crystal behavior of a Ni3Al-based single crystal superalloy IC6SX

Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483

In this study, the effect of Ta/W ratio on the microstructure and stress rupture properties of Ni-based single crystal (SX) superalloy PWA1483 was investigated. For this purpose, single crystal (SX) superalloys with different Ta/W ratios (0.75, 1.0, 1.32 and 1.5 in wt.%) were fabricated. The alloys were directionally solidified by Bridgman method under the same solidification condition at withd...

Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades

Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative environments. To control the quality of the single crystal turbine blades, particular attention has been paid to grain selection,...

Influence of crystal orientation on the thermomechanical fatigue behaviour in a single- crystal superalloy

Crystallographic Orientation Influence on the Serrated Yielding Behavior of a Single-Crystal Superalloy

Since Ni-based single-crystal superalloys are anisotropic materials, their behavior in different crystal orientations is of great interest. In this study, the yielding behavior in both tension and compression for , and oriented materials at 500 °C has been investigated. The direction showed a serrated yielding behavior, a great tension/compression asymmetry in yield strength and visible deforma...

Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades

Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative environments. To control the quality of the single crystal turbine blades, particular attention has been paid to grain selection,...