Investigation on alkali activated fly ash and slag concrete using neutral grade water glass as activator

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG

ALKALI Activated FLY-ASH Based Geopolymer Concrete

Considering the increasing demand for developing alternative construction materials, due to the growing environmental concerns, this paper discusses the feasibility of alkali activated geo-polymer concrete, as a future construction material. The main objective of this study involves observation of structural behaviours of the fresh fly ash-based geo-polymer concrete, understanding the basic mix...

Properties of alkali activated slag-fly ash blends with limestone addition

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...

SELF-Cured Alkali Activated Slag Concrete Mixes- An Experimental Study

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

Study on the Alkali Activated Fly Ash Mortar

The development of alkali-activated binders seems to present a greener alternative to OPC. The present study has been made on the low calcium fly ash with alkali activator as an alternative binding material as mortar. The mortar has been prepared with ennore sand and Indian fly ash mixed with alkali activator fluid consisting of sodium silicate and sodium hydroxide of different concentrations. ...