Investigation of Process Parameters Optimization in Die - Sinking Edm to Improve Process Performance Using Taguchi Technique
نویسندگان
چکیده
منابع مشابه
Optimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملOptimization of EDM Process Parameters: A Review
Electrical Discharge Machining performance is generally evaluated on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), Relative Wear Ratio (RWR) and Surface Roughness (SR). The important EDM machining parameters affecting to the performance measures of the process are discharge current, pulse on time, pulse off time, arc gap, and duty cycle [9]. A considerable amount of work has b...
متن کاملOptimization of Process Parameters of Pressure Die Casting using Taguchi Methodology
The present work analyses different parameters of pressure die casting to minimize the casting defects. Pressure diecasting is usually applied for casting of aluminium alloys. Good surface finish with required tolerances and dimensional accuracy can be achieved by optimization of controllable process parameters such as solidification time, molten temperature, filling time, injection pressure an...
متن کاملTaguchi method and Pareto ANOVA: An approach for process parameters optimization in micro-EDM drilling
Technological advances have facilitated many developments in the MEMS, electrical, medical and aerospace industries in recent years. As the devices commonly found in these industries have become smaller, so the requirements for high-precision machining techniques have become ever more pressing. Nowadays, micro-machining processes are playing an important role in satisfying these requirements. A...
متن کاملMulti-objective optimisation of die sinking electro discharge machining process using Taguchi
The objective of this paper is to determine the optimal setting of the process parameters on the electro-discharge machining (EDM) machine while machining AISI H13 tool steel. The parameters considered are pulse current, pulse-on-time, pulse-off-time and gap voltage ; whereas the responses are Tool wear ratio (TWR) and material removal rate (MRR). The optimal setting of the parameters are deter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOSR Journal of Mechanical and Civil Engineering
سال: 2016
ISSN: 2320-334X,2278-1684
DOI: 10.9790/1684-130503130133