Investigation of Performance and Rotor Tip Flow Field in a Low Speed Research Compressor with Circumferential Groove Casing Treatment at Varying Tip Clearance
نویسندگان
چکیده
منابع مشابه
Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor
The effect of the tip gap size on the performance of a multistage axial compressor was studied by means of computational fluid dynamics (CFD). It was found that the performance of the compressor was very sensitive to the size of the tip gap. By increasing the gap size, the stall margin value, the total pressure ratio and the compressor efficiency reduced considerably. The flow field at the tip ...
متن کاملStudy of Rotor Tip-Clearance Flow Using Large-Eddy Simulation
A large-eddy simulation has been performed to study the temporal and spatial dynamics of a rotor tip-clearance flow, with the objective of determining the underlying mechanisms for low pressure fluctuations downstream of the tip-gap. Simulation results are compared with experimental measurements, and favorable agreements are observed in both qualitative and quantitative sense. Typical vortical ...
متن کاملEffects of Different Turbulence Models in Simulation of Unsteady Tip Leakage Flow in Axial Compressor Rotor Blades Row
Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...
متن کاملAspects of Two-Phase Flow Screw Compressor Modelling Part I: Leakage Flow and Rotor Tip Friction
A one-dimensional leakage flow model for two-phase ammonia-water twin screw compressors is presented. The model takes into account viscous and acceleration forces and is based on three conservation equations and on the equation of state for homogenous NHiH20 mixture. The governing equations are solved with a finite difference method. Numerical shooting is used to find such inlet flow velocity a...
متن کاملInfluence of Tip Clearance on Pressure Fluctuation in Low Specific Speed Mixed-Flow Pump Passage
To explore the influence of tip clearance on pressure fluctuation in a low specific speed mixed-flow pump, tip clearances δ of 0.25 mm, 0.75 mm and 1.00 mm, along with no tip clearance, were selected. The reliability of the simulation was verified by comparison with the experimental data of external characteristics and fluctuation in the guide vane passage. Through ANSYS-CFX, MATLAB code and fa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 2017
ISSN: 1023-621X,1542-3034
DOI: 10.1155/2017/4631751