Investigation of moisture condition and Autoclam sensitivity on air permeability measurements for both normal concrete and high performance concrete

A Study on Behaviour of Normal Strength Concrete and High Strength Concrete Subjected to Elevated Temperatures

Cement concrete is a complex mixture of different materials. Behaviour of concrete depends on its mix proportions and constituents when it is subjected to elevated temperatures. Principal effects due to elevated temperatures are loss in compressive strength, loss in weight or mass, change in colour and spall of concrete. The experimental results of normal concrete and high strength concrete sub...

Performance of High-strength Concrete

This research was undertaken to investigate performance of high-strength concrete incorporating mineral admixtures, fly ash and silica fume. For modern construction, the use of new construction materials is increasing to achieve economy and improved final results. An extensive literature search was carried out to review various engineering properties of high-strength concrete. In this study, th...

effect of bataine and sulphate supplement on wool and milk characteristics and lambs performance in naine ewes

تعداد 20 رأس میش نژاد نائینی 6+-24 ماهه، با میانگین وزن 2/3-+40 کیلوگرم، همراه با 20 رأس بره های آنها در قالب طرح کاملا تصادفی اثر بتائین و مکمل سولفات بر خصوصیات شیر و پشم و عملکرد بره ها بررسی شد. میش ها بطور تصادفی در چهار تیمار قرار گرفتند. تیمارها عبارت بودند از: 1-گروه شاهد 2-بتائین (05/0 درصد ماده خشک) 3-سولفات (24/0 سولفور درصد ماده خشک 4-بتائین هرماه با سولفات. جیره غذائی طبق nrc با مح...

Center for By-Products Utilization Temperature Effects on Permeability of High-Performance Concrete

Predicting the Permeability of Pervious Concrete (Enhanced Porosity Concrete) from Non-Destructive Electrical Measurements

The effectiveness of a pervious concrete pavement to transport water through it depends on the intrinsic permeability of the system. However, this characteristic is usually defined in terms of the porosity of the material. It has been observed that porosity alone is an inadequate indicator of the permeability of pervious concretes, since the permeability depends on pore sizes, geometry and conn...