Investigation of mechanical and microstructural properties S 235 JR (ST 37-2) steels welded joints with FCAW
نویسندگان
چکیده
منابع مشابه
The Effect of Welding Energy on the Microstructural and Mechanical Properties of Ultrasonic-Welded Copper Joints
The effects of welding energy on the mechanical and microstructural characteristics of ultrasonic-welded pure copper plates were investigated. Complex dynamic recrystallization and grain growth occurred inside the weld zone during ultrasonic welding. At a low welding energy, a thin band of straight weld interfaces was observed and had an ultra-fine grain structure. With an increase in welding e...
متن کاملEffect of heat input on the mechanical properties of welded joints in high-strength steels
Taylor & Francis makes every effort to ensure the accuracy of all the information (the “Content”) contained in the publications on our platform. However, Taylor & Francis, our agents, and our licensors make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opin...
متن کاملEffect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints
In this research work, an attempt has been made to examine the different welding parameters which affect the weldability of 304H Austenitic stainless steel (ASS) welded joint using the proper filler wire. Chemical composition of filler wire was same as that of base metal. Further this study addressed the combined effect of various welding parameters on the metallurgical and mechanical propertie...
متن کاملMicrostructural Properties of Semisolid Welded Joints for AISI D 2 Tool Steel
The aim of this study is to investigate experimentally the microstructural evolution of the joints using ledeburitic AISI D2 Tool Steel parts. The application of a new process of the semisolid joining of two parts of AISI D2 cold-work tool steel is proposed using a partial remelting method. Samples were heated in an argon atmosphere up to 1300°C and held for 10 minutes. Metallographic analyses ...
متن کاملEnhancement in Mechanical Properties of Vibratory Welded Joints: an Overview
This paper consolidated the improvements in mechanical properties from the past literature available using Vibratory welding technique. Vibratory welding is a promising method in eliminating the disadvantages experienced by the traditional welding like residual stress due to the electrical energy input which induces vibrations by varying the input parameters voltage, current, amplitude and freq...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallic Materials
سال: 2016
ISSN: 0023-432X
DOI: 10.4149/km_2014_1_57