Investigation of Copper and Iron Recovery from Copper Ore by High Pressure Leaching
نویسندگان
چکیده
منابع مشابه
Recovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملUP-GRADATION OF MoO3 AND SEPARATION OF COPPER, IRON, ZINC FROM ROASTED MOLYBDENUM ORE BY A LEACHING PROCESS
The present research paper deals with the oxidation process of molybdenum ore. The main target of the present study is the up-gradation of MoO3 from roasted molybdenum ore by a leaching process without waste generation. The most important application of hydrometallurgical processing is the leaching process of the ore and it is the primary process to make pure metal from ore. The present investi...
متن کاملKinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior
Kinetics of the chemical leaching of chalcocite from a low-grade copper ore in a ferric sulfate medium was investigated using the constrained least square optimization technique. The experiments were carried out for different particle sizes in both the reactor and column at constant Eh, pH, and temperature. The leaching rate increased with increase in the temperature. About 50% of the Cu recove...
متن کاملInvestigation of Flotation Parameters for Copper Recovery from Enargite and Chalcopyrite Mixed Ore
A flotation pre-treatment study for the separation of enargite (Cu3AsS4) from chalcopyrite (CuFeS2) ores of different origins was investigated in this work. The copper ore bearing enargite mineral contained 5.87mass% As and 16.50mass% Cu while the chalcopyrite bearing ore contained 0.32mass% As and 21.63mass% Cu. The two ore samples were mixed at 7 : 3 (enargite : chalcopyrite) by weight ratio ...
متن کاملcopper and nickel recovery from electroplating sludge by the process of acid-leaching and electro-depositing
in this work, we developed a method which combined the processes of acid-leaching, ammonium jarosite precipitating and electro-depositing to recover copper and nickel from electroplating sludge. residual sludge from an electroplating plant located in qingdao was used for acid-leaching, and more than 95% of copper, nickel, zinc, chromium and iron were extracted from the sludge. after acid-leachi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of the Society of Materials Engineering for Resources
سال: 2018
ISSN: 1347-9725,1884-6629
DOI: 10.5188/ijsmer.23.80