INVESTIGATION INTO DRY MACHINING AS ENVIRONMENT FRIENDLY DRILLING OF CERAMIC REINFORCED ALUMINIUM MATRIX COMPOSITES
نویسندگان
چکیده
منابع مشابه
Roller Burnishing of Particle Reinforced Aluminium Matrix Composites
Energy and resource efficient systems often demand the use of light-weight materials with a specific combination of properties. However, these requirements usually cannot be achieved with homogeneous materials. Consequently, composites enabling tailored properties gain more and more importance. A special kind of these materials is aluminium matrix composites (AMCs), which offer elevated strengt...
متن کاملMatrix cracking of fiber-reinforced ceramic composites in shear
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under shear loading. To this end, we develop a model based on potential energy differences upstream and downstream of a fully bridged steady-state mat...
متن کاملWear of ceramic particle-reinforced metal-matrix composites
Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...
متن کاملBioactive ceramic-reinforced composites for bone augmentation.
Biomaterials have been used to repair the human body for millennia, but it is only since the 1970s that man-made composites have been used. Hydroxyapatite (HA)-reinforced polyethylene (PE) is the first of the 'second-generation' biomaterials that have been developed to be bioactive rather than bioinert. The mechanical properties have been characterized using quasi-static, fatigue, creep and fra...
متن کاملAn experimental investigation on the machinability of powder formed silicon carbide particle reinforced aluminium metal matrix composites
The paper attempts to study the machinability issues of aluminium-silicon carbide (Al-SiC) metal matrix composites (MMC) in turning using HSS cutting tool. SiCp-reinforced metal matrix composites (MMCs) containing SiC particles (5wt%-20wt %) of 400mesh size were prepared by powder metallurgy (P/M) route and used as work material for turning. Experiments were conducted at various cutting speeds ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING & TECHNOLOGY
سال: 2020
ISSN: 0976-6499,0976-6480
DOI: 10.34218/ijaret.11.12.2020.083