INVESTIGATING THE POSSIBILITY OF ALLOYING AN ALLOY ALSI25CU5CR WITH CO, CR AND MO USING METAL POWDER
نویسندگان
چکیده
A base aluminium-silicon alloy AlSi25Cu5Cr was used to investigate the possibility of alloying aluminium alloys with hard-to-melt elements. The elements Co, Cr and Mo were introduced into melt using metal powder from a hard-melting dental cobalt-chromium-molybdenum alloy. packed in foil studied at temperature 810º C. After mechanical stirring melt, it stood for 30 min. temperature, raised 850º C experimental castings cast it. spectral analysis, degree absorption by determined. structure properties thus obtained investigated.
منابع مشابه
COMPARATIVE STUDY OF CYTOTOXICITY OF DIRECT METAL LASER SINTERED AND CAST Co-Cr-Mo DENTAL ALLOY
T. Puskar, Department of Dentistry, Medical Faculty, University of Novi Sad, Serbia. A. Lapcevic, D. Jevremovic, Clinic for Prosthodontics, School of Dentistry Pančevo, University Business Academy, Novi Sad, Serbia. S. Arandjelovic, S. Radulovic, Institute for Oncology and Radiology of Serbia, Belgrade, Serbia. I. Budak, Dj. Vukelic, Faculty of Technical Sciences, University of Novi Sad, Novi S...
متن کاملCORROSION RESISTANCE OF Co-Cr-Mo ALLOY USED IN DENTISTRY ODPORNOŚĆ KOROZYJNA STOPU Co-Cr-Mo WYKORZYSTYWANEGO W STOMATOLOGII
The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...
متن کاملthe evaluation of language related engagment and task related engagment with the purpose of investigating the effect of metatalk and task typology
abstract while task-based instruction is considered as the most effective way to learn a language in the related literature, it is oversimplified on various grounds. different variables may affect how students are engaged with not only the language but also with the task itself. the present study was conducted to investigate language and task related engagement on the basis of the task typolog...
15 صفحه اولEvaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique.
The purpose of this study was to compare the castability of Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) and Co-Cr-Mo (Vera PDI) alloys invested with either conventional (phosphate- and silica-based) or mixed investing techniques. A 10 X 10 mm square-shaped nylon net containing 100 open squares served as a template for construction of wax patterns, which were invested with phosphate-based inves...
متن کاملComparison of Dental Prostheses Cast and Sintered by SLM from Co-Cr-Mo-W Alloy
The article presents the results of a comparative analysis of the metal substructure for dental prosthesis made from a Co-Cr-Mo-W alloy by two techniques, i.e. precision investment casting and selective laser melting (SLM). It was found that the roughness of the raw surface of the SLM sinter is higher than the roughness of the cast surface, which is compensated by the process of blast cleaning ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vide. Tehnolo?ija. Resursi
سال: 2023
ISSN: ['2256-070X', '1691-5402']
DOI: https://doi.org/10.17770/etr2023vol3.7180