INVESTIGATING THE EFFECT OF WELDING PASTE CONTAINING GRAPHENE NANOSHEETS ON BONDING PROPERTIES OF WELDED AISI 304 STAINLESS STEEL PRODUCED BY FLUX-CORED ARC WELDING
نویسندگان
چکیده
INVESTIGATING THE EFFECT OF WELDING PASTE CONTAINING GRAPHENE NANOSHEETS ON BONDING PROPERTIES WELDED AISI 304 STAINLESS STEEL PRODUCED BY FLUX-CORED ARC
منابع مشابه
Investigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process
In this research, St37 and 316L steel sheets were welded using friction stir welding (FSW) process and effective parameters such as the rotational speed, linear speed of the tool, pin diameter, and their appropriate values were studied. The microstructure, hardness, and strength of the different welding regions were investigated. It was observed that in the stir zone (SZ), a mechanical operatio...
متن کاملSome Studies on Temperature Distribution Modeling of Laser Butt Welding of AISI 304 Stainless Steel Sheets
In this research work, investigations are carried out on Continuous Wave (CW) Nd:YAG laser welding system after preliminary experimentation to understand the influencing parameters associated with laser welding of AISI 304. The experimental procedure involves a series of laser welding trials on AISI 304 stainless steel sheets with various combinations of process parameters like beam power, beam...
متن کاملInfluence of Flux Cored Arc Welding Parameters on the Weld Bead Geometry in 316l Stainless Steel Claddings Deposited on Aisi 1020 Carbon Steel Plates
In recent years, stainless steel cladding applications have increased in industrial environments due to this process allows anti-corrosive surfaces be produced from low cost materials, such as carbon steel or low alloy steels. However, to ensure the final quality of the claddings, it is important to know the welding parameters’ effects on the process outputs. This contributes to an appropriate ...
متن کاملDissimilar Welding of EN 10025 Carbon Steel to AISI 316L Stainless Steel by Friction Stir Welding
In the present Study, a dissimilar joint of carbon steel sheet EN 10025 with 316 L has been welded by FSW and the welding parameters were optimized by RSM software method. For investigation of mechanical properties and microstructural analysis carried out by using optical, scanning electron microscopes with EDS analysis, tensile and hardness test of different area of joints, SZ, TMAZ, HAZ, thei...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ???????
سال: 2021
ISSN: ['1998-0701']
DOI: https://doi.org/10.47176/jame.40.1.23031