INVESTIGATING POSSIBILITIES OF CRACK INITIATION LIFE EXTENSION IN JET ENGINES COMPRESSOR DISKS
نویسندگان
چکیده
منابع مشابه
Side Effects of Shot Peening on Fatigue Crack Initiation Life
Shot peening beneficial effects on fatigue life of mechanical components are well known. However, there are some reports in the literature that indicate inappropriate shot peening parameters tend to reduce the fatigue life. It is therefore, the purpose of this study to find a logical quantitative justification for these observations. Using finite element method, a dynamic elastic-plastic simula...
متن کاملEdge Crack Studies in Rotating FGM Disks
This article focused on the stress analysis of an edge crack in a thin hallow rotating functionally graded material (FGM) disk. The disk is assumed to be isotropic with exponentially varying elastic modulus in the radial direction. A comprehensive study is carried out for various combinations of the crack length and orientation with the different gradation of materials. The effect of non-unifor...
متن کاملAn Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade
First row rotating blades of four axial-flow compressors were prematurely fractured. Previous investigations showed that the site atmosphere contains corrosive compounds which lead to an increase in possibility of pitting on the blades. It was also revealed that the crack was originated from two corrosion pits. Thus, this work is conducted to ascertain which of fatigue or stress corrosion crack...
متن کاملOff-Design Performance Prediction of Jet Engines
In this paper it is attempted to predict the off-design performance of a jet engine. After a review of the governing equations, the off-design performance is investigated by two methods. In the first method, the component characteristic curves of the Gas Turbines are used. In the second method some design point parameters and the reference state conditions are employed. The results obtained by ...
متن کاملCrack Initiation and Extension in Steel for Short Loading Times
The one-point bend impact test has been used to investigate crack instability conditions for short loading times (as short as 2.5 p) in high strength steel. It was found that, in the range of loading rates investigated, no time-modified fracture criterion need be invoked. The resistance to crack extension may, however, increase significantly with crack growth due to the formation of even small ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Serbian Society for Computational Mechanics
سال: 2020
ISSN: 1820-6530,2620-1941
DOI: 10.24874/jsscm.2020.14.02.09