Investigating pitting in X65 carbon steel using potentiostatic polarisation
نویسندگان
چکیده
منابع مشابه
In situ observation of pitting of stainless steel by XAFS.
An in situ observation technique by XAFS (X-ray Absorption Fine Structures) has been developed for observation of metal corrosion. XAFS spectra were obtained with a special electrochemical cell to elucidate pitting: change of concentrations and structures of ions near the interface of solution and metal. It has been successfully shown that the concentrations of Cr and Br are linearly dependent ...
متن کاملElectrochemical Investigation of the Corrosion of Different Microstructural Phases of X65 Pipeline Steel under Saturated Carbon Dioxide Conditions
The aim of this research was to investigate the influence of metallurgy on the corrosion behaviour of separate weld zone (WZ) and parent plate (PP) regions of X65 pipeline steel in a solution of deionised water saturated with CO2, at two different temperatures (55 °C and 80 °C) and at initial pH~4.0. In addition, a non-electrochemical immersion experiment was also performed at 80 °C in CO2, on ...
متن کاملProbabilistic Pitting Corrosion Risk Assessment of Welded Offshore Steel Pipelines
Steel structures continuously exposed to offshore marine environments are prone to corrosion. This can be of major economic and perhaps of environmental significance. The risk of these scenarios occurring can be assessed using good quality data, good quality corrosion and pitting models and structural reliability assessment. Recently, improved models for the prediction of longer term corrosion ...
متن کاملFeature Extraction of Acoustic Emission Signals from Low Carbon Steel Pitting Based on Independent Component Analysis and Wavelet Transforming
According to the characteristics of low-carbon steel pitting acoustic emission signal, one new characteristic analysis-WICA is proposed. The main idea of WICA is that based on the independent component analysis blind source separation technology as well as the wavelet transformation decomposition technology, proposed determines the low-carbon steel pitting source number according to the energy ...
متن کاملMODELING THE HOT DEFORMATION FLOW CURVES OF API X65 PIPELINE STEEL USING THE POWER LAW EQUATION
Till now, different constitutive models have been applied to model the hot deformation flow curves of different materials. In this research, the hot deformation flow stress of API X65 pipeline steel was modeled using the power law equation with strain dependent constants. The results was compared with the results of the other previously examined constitutive equations including the Arrhenius eq...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Surface Science
سال: 2017
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2017.06.015