Investigating microstructure effects of heat-treated commercially pure titanium (cp-Ti) based on mechanistic modeling of micro milling
نویسندگان
چکیده
منابع مشابه
INVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
Abstract: In chloride salt solutions, titanium alloys exhibit reasonably high pitting potentials as high as +10 V (vs. Ag/AgCl) at room temperatures. On the other hand, anodic pitting potentials are significantly lower in bromide solutions. In this study, pitting corrosion of commercially pure titanium in aqueous NaBr solution of 0.1 M concentration at room temperature was studied and the e...
متن کاملMicrostructure and microtexture of highly cold-rolled commercially pure titanium
The microstructure and texture evolution of a commercially pure titanium sheet during cold-rolling is investigated in detail by X-ray diffraction and by orientation imaging in the FEG-SEM and in the TEM. The experimental data are compared with simulation results obtained by a viscoplastic self-consistent model. The aim of this work is to provide with a detailed description of the fine scale def...
متن کاملVickers hardness of cast commercially pure titanium and Ti-6Al-4V alloy submitted to heat treatments.
The purpose of this study was to evaluate the effect of heat treatments on the Vickers hardness of commercially pure titanium and Ti-6Al-4V cast alloys. Six-millimeter-diameter cylindrical specimens were cast in a Rematitan System. Commercially pure titanium and Ti-6Al-4V alloy specimens were randomly assigned to 3 groups (n=10) that received the following heat treatments: control (no heat trea...
متن کاملDislocation Density-based Grain Refinement Modeling of Orthogonal Cutting of Commercially Pure Titanium
Recently, machining has been exploited as a means for producing ultra-fine grained (UFG) and nanocrystalline microstructures for various metal materials, such as aluminum alloys, copper, stainless steel, titanium and nickel-based super alloys, etc. However, no predictive, analytical or numerical work has ever been presented to quantitatively predict the change of grain sizes during machining. I...
متن کاملDevelopment of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process
The present work aims to modify surface properties of pure Ti by development of Ti-Al-N intermetallic composite coatings. In this regard, tungsten inert gas (TIG) cladding process was carried out using Al 1100 as filler rod with Ar and Ar+N2 as shielding gases. Phase and structure of the samples were investigated by X-ray diffraction (XRD) technique, optical microscopy (OM) and scanning electro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2019
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.04.151