Intermetallic phase kinetic formation and thermal crack development in galvanized DCI
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولIntermetallic phase formation during arnnealing of AI/Ni muMayers
The phase evolution during annealing of AlJNi multilayer samples prepared by ion-beam sputtering with composition modulation wavelengths A between 10 and 400 nm was determined using x-ray diffraction and differential scanning calorimeter measurements. Samples with average compositions of &n,N10,6,, and Al,,,N&,~ were investigated. For the Al,,40Ni0.60 samples the following results were obtained...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ANALYTICAL DATA FOR NiO REDUCTION AND Al3Ni2 INTERMETALLIC COMPOUND FORMATION
In this research, the nickel oxide was dissolved in cryolite at temperatures of 880, 940 and 1000°C. In order to reduce the nickel oxide, aluminum was added to the salt. Simultaneously the nickel oxide was reduced and Al3Ni2 intermetallic compound was formed. In the duration intervals of 2.5-40 minutes samples of the salt and metallic phases were taken. The variation of the nickel content in me...
متن کاملEFFECTS OF THERMAL AGING ON INTERMETALLIC COMPOUNDS AND VOIDS FORMATION IN AuAl WIRE BONDING
There are several issues related to the mechanical and electrical wirebond failure during wirebonding process. Major factors are associated with AuAl intermetallic system. AuAl intermetallic compounds (IMC) can easily form at room temperature and can be accelerated with the elevated temperature. In this paper, pattern of intermetallic compounds growth and potential degradation due to voids in t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2019
ISSN: 1971-8993
DOI: 10.3221/igf-esis.48.67