Interlaminar fracture toughness of hybrid carbon fiber‐carbon nanotubes‐reinforced polymer composites
نویسندگان
چکیده
منابع مشابه
Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
1.1 This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite materials using the double cantilever beam (DCB) specimen (Fig. 1). 1.2 This test method is limited to use with composites consisting of unidirectional carbon fiber and glass fiber tape laminates with brittle and tough single-phase polymer matrice...
متن کاملMultiscale Polymer Composites: A Review of the Interlaminar Fracture Toughness Improvement
Composite materials are prone to delamination as they are weaker in the thickness direction. Carbon nanotubes (CNTs) are introduced as a multiscale reinforcement into the fiber reinforced polymer composites to suppress the delamination phenomenon. This review paper presents the detailed progress made by the scientific and research community to-date in improving the Mode I and Mode II interlamin...
متن کاملEffects of Temperature and Fiber Orientation on the Mode I Interlaminar Fracture Toughness of Carbon/epoxy Composites
Delamination is a predominant failure mechanism in composite structures. In the present study, double cantilever beam tests were performed to investigate the effects of temperature and fiber orientation on the Mode I interlaminar fracture toughness, G I , of carbon fiber-reinforced epoxy composites, T800H/#3631. The values of G I for three kinds of laminates, [0 12 //0 12 ], [22.5/-22.5/0 8 /-2...
متن کاملfracture toughness evaluation of hybrid and nano-hybrid resin composites after ageing under acidic environment
statement of problem: tooth-coloured restorative materials are brittle with the major shortcomings of sensitivity to flaws and defects. although various mechanical properties of resin composites have been studied, no fracture toughness test data for nano-hybrid composites under acidic condition for a long period of time has been published. objectives: to compare the fracture toughness (k ic ) o...
متن کاملPrediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Composites
سال: 2018
ISSN: 0272-8397,1548-0569
DOI: 10.1002/pc.25054