Intergranular Corrosion of the as Cast Hypoeutectic Zinc-Aluminium Alloy
نویسندگان
چکیده
منابع مشابه
Intergranular pitting corrosion of CoCrMo biomedical implant alloy.
CoCrMo samples of varying microstructure and carbon content were electrochemically corroded in vitro and examined by scanning electron microscopy and electron backscatter diffraction techniques. The rate of corrosion was minimized (80% reduction from icorr = 1396 nA/cm(2) to icorr = 276 nA/cm(2) ) in high-carbon CoCrMo alloys which displayed a coarser grain structure and partially dissolved sec...
متن کاملZinc Alloy Electrodeposition for Corrosion Protection
t is known that the protective value of zinc is partially a result of its ability to form a protective film when plated on a base metal, such as steel. The zinc is sacrificial and corrodes I preferentially to protectthe steel. Although pure zinc coating provides some degree of protection for the substrate, in a severe corrosion environment, zinc is consumed rapidly. For this reason, it is usual...
متن کاملZinc-Alloy-Plating for Corrosion Protection
Zinc represents the most effective and economic corrosion protection especially for steel base materials. Improved corrosion resistance can be achieved by alloying zinc with small amounts (around 1 Yo) of transition metal elements like Co, Ni and Fe. Zn-Fe and Zn-Co alloys containing up to 1.5 Yo of the transition metal were plated using an alkaline and acidic electrolyte respectively. Zn-Ni al...
متن کاملThe Correlation between Grain Boundary Character and Intergranular Corrosion Susceptibility of 2124 Aluminum Alloy
The effects of grain boundary character on the intergranular corrosion susceptibility of 2124 aluminum alloy were examined. In the study, the alloy was heat treated at 540oC and corrosion tested according to ASTM G110 standards. After obtaining grain orientations from the automated Electron Back-Scatter Diffraction (EBSD), both grain boundary character and grain boundary plane distributions wer...
متن کاملStudies of Corrosion of Aluminium and 6063 Aluminium Alloy in Phosphoric Acid Medium
The corrosion behaviour of aluminium and6063 aluminium alloy was investigated in phosphoric acid of different concentrations at different temperatures. The study was done by electrochemical method, using Tafel polarization and electrochemical impedance spectroscopy (EIS) techniques. The kinetic parameters and thermodynamic parameters were calculated using Arrhenius theory and transition state t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2017
ISSN: 2299-2944
DOI: 10.1515/afe-2017-0095