Interference Assembly and Fretting Wear Analysis of Hollow Shaft
نویسندگان
چکیده
منابع مشابه
Interference Assembly and Fretting Wear Analysis of Hollow Shaft
Fretting damage phenomenon often appears in the interference fit assembly. The finite element model of hollow shaft and shaft sleeve was established, and the equivalent stress and contact stress were computed after interference assembly. The assembly body of hollow shaft and shaft sleeve was in whirling bending load, and the contact status (sticking, sliding, and opening) and the distribution o...
متن کاملFretting Wear between a Hollow Sphere and Flat Surface
Wear particles in a hard disk drive may cause the head/disk interface to fail. We have experimentally investigated wear particle generation resulting from fretting wear between the dimple on the suspension and the gimbal spring. We have found that increasing the normal load as well as using a low friction coating reduces the formation of wear particles. INTRODUCTION Examination of failed hard d...
متن کاملNumerical Modeling of Fretting Wear
In this paper, a review of some techniques proposed in the literature for modelling fretting wear is presented. Fretting wear occurs when surfaces are degraded and materials are removed due to a small relative oscillatory motion between two contact surfaces. Due to the continuous change in the shape of a structure during its lifetime, the design of engineering components subjected to fretting w...
متن کاملElastoplastic torsion of hollow FGM circular shaft
In many cases, a torsional shaft may be a thick-walled radially inhomogeneous cylindrical object. The hollow shafts made of functionally graded materials (FGMs) are such kind of compositions which were studied in this paper. Cylindrical FG shafts are composed of ceramic and metallic parts with power function distribution across the radial direction. The ceramic phase is isotropic elastic and th...
متن کاملThe effect of different assembly loads on taper junction fretting wear in total hip replacements
Variability in the magnitude of the impaction force applied by surgeons to assemble a hip prosthetic head to a femoral stem could be a cause of increased wear in taper junctions. This study investigates the effect of varying the magnitude of the assembly force on fretting wear at the taper over a 10 year period using a 3D finite element model and wear algorithm. It is demonstrated that an incre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Scientific World Journal
سال: 2014
ISSN: 2356-6140,1537-744X
DOI: 10.1155/2014/919518