Interfacial Stress Analysis of Adhesively Bonded Lap Joint
نویسندگان
چکیده
منابع مشابه
Effect of Adherend Shape on Stress Concentration Reduction of Adhesively Bonded Single Lap Joint
Article history: Received: 03.10.2014. Received in revised form: 19.12.2014. Accepted: 30.12.2014. In this work, the effect of adherend shape on the tensile strength of adhesively bonded single lap aluminum structures joint was numerically studied using three dimensional finite element models. Six joint models were investigated. In this paper, a static finite element analysis was performed in A...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملAnalysis of adhesive-bonded single-lap joint with an interfacial crack and a void
void within the adhesive. Depending upon the number of notches and voids, the specimen is divided into several regions. Assuming that a plane strain state of deformation prevails in the specimen, we write the balance of forces and moments for each section and impose the continuity of displacements, forces and moments at the interfaces between the adjoining sections. By taking the Laplace transf...
متن کاملPropagation of ultrasonic Lamb waves in adhesively bonded lap joints
This paper considers the bonded joint as a multilayer structure that is analysed using the Transfer Matrix method. In this particular case three layers (two adherents and the adhesive) are considered. The study of this propagation problem may be developed from matrix formulations which describe elastic waves in layered media. This technique combines the theory of the dynamics of the continuum w...
متن کاملFracture behaviour of adhesively bonded single lap joint with 45° ply oriented four layered symmetric and antisymmetric adherends
In aerospace and many types of civil infrastructure applications, the use of adhesive-bonded composite joints have been constantly increasing. In this study, fracture behaviour of adhesively bonded single lap joint (SLJ) with pre-existing damage at the interface of free edge of the top adherend and adhesive along the width of the joint is studied by strain energy release rate (SERR) approach us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12152403