Interfacial reaction between Al2O3-SiC ceramics and pure Ni.
نویسندگان
چکیده
منابع مشابه
Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings
A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical paramete...
متن کاملارزیابی رفتار مکانیکی پوشش کامپوزیتی نانوساختار Ni-P/Al2O3-SiC
در این پژوهش، پوشش نانو کامپوزیت هیبریدی Ni-P/Al2O3-SiC و پوشش ساده Ni-P، با استفاده از فرآیند آبکاری الکتریکی، روی زمینهای از جنس مس تهیه گردید. آبکاری الکتریکی در هر دو مورد، بوسیله جریان مستقیم (DC) انجام شد. اندازه نانو ذرات SiC و نانو ذرات Al2O3 مورد استفاده برای تهیه حمام نانو کامپوزیت، به ترتیب nm55 و nm50 بود. مشخصهیابی و بررسی مورفولوژی سطح...
متن کاملModulation in current density of metal/n-SiC contact by inserting Al2O3 interfacial layer
Metal contact to SiC is not easy to modulate since the contact can be influenced by the metal, the termination of the SiC, the doping, and the fabrication process. In this work, we introduce a method by inserting a thin Al2O3 layer between metal and SiC to solve this problem simply but effectively. The Al2O3/n-SiC interface composition was obtained with X-ray photoemission spectroscopy, and the...
متن کاملstudy and analysis of al2o3-sic nanocomposite ceramics’ fracture toughness using vickers indenter
the basic trait in the ceramics is their high brittle or low fracture toughness, and the main criteria in the design and application is specifying the fracture toughness in ceramics. in this paper, a new method is proposed to determine the fracture toughness of ceramics, which is enhanced in lowering the cost of fracture toughness determination relative to the previous methods. hence due to the...
متن کاملDevelopment of Al2O3 fiber-reinforced Al2O3-based ceramics.
The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infilt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1989
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.36.65