Interface shear characteristics of dredger fill and concrete using large size direct shear test
نویسندگان
چکیده
منابع مشابه
Particle Size Effect on Shear Strength of Granular Materials in Direct Shear Test
The effect of particle size on shear strength of granular materials are investigated using direct shear tests. Small direct shear test (60 mm by 60 mm by 24 mm deep) were conducted for particles passing the sieves with opening size of 2.36 mm. Meanwhile, particles passing the standard 20 mm sieves were tested using large direct shear test (300 mm by 300 mm by 200 mm deep). The large direct shea...
متن کاملInfluences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength
Weak bonding between layers of pavement leads to damages on the composite pavement. Bonding plays an important role in the durability and maintenance of composite pavement layers. The present study evaluates the factors effective in bond strength of the interface between concrete and asphalt pavements. The factors considered for this purpose include steel slag percentage in the concrete pavemen...
متن کاملConcrete Shear Wall Construction
Buildings with cast-in-situ reinforced concrete shear walls are widespread in many earthquake-prone countries and regions, such as Canada, Chile, Romania, Turkey, Colombia, the republics of the former Soviet Union, etc. This type of construction has been practiced since the 960s in urban regions for mediumto high-rise buildings (4 to 35 stories high). Shear wall buildings are usually regular in...
متن کاملSize Effect of Shear Failure in Prestressed Concrete Beams
It is shown that the size effect predicted by dimensional analysis of fracture mechanics of failures due to progressive distributed microcracking agrees with the test data existing in the literature better than the presently used strength (ultimate load) criterion, which exhibits no size effect, and better than the linear i!lastic fracture mechanics criterion, which exhibits much too strong a s...
متن کاملInterface shear and pressure characteristics of wheelchair seat cushions.
Pressure ulcer incidence rates have remained constant despite advances in support surface technology. Interface shear stress is recognized as a risk factor for pressure ulcer development and is the focus of many shear reduction technologies incorporated into wheelchair cushions; however, shear reduction has not been quantified in the literature. We evaluated 21 commercial wheelchair seat cushio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Geo-Engineering
سال: 2018
ISSN: 2092-9196,2198-2783
DOI: 10.1186/s40703-018-0081-3