Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance
نویسندگان
چکیده
منابع مشابه
Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics
Due to their sensitivity to impact-induced delamination, woven fabric reinforced polymer composites have limited practical applications. Hybridization of polymer composites has been proposed as a solution to this problem. In this study, the effects of fiber reinforcement type, hybridization method, plies stacking sequence and loading rate on mode I delamination behavior of pure basalt, pure nyl...
متن کاملPrediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملAnalysis of mode I delamination of z-pinned composites using a non-dimensional analytical model
We present a non-dimensional analytical model for crack propagation in a z-pinned double cantilever beam specimen (DCB) under mode I loading. Effect of various design parameters on the crack bridging length and apparent fracture toughness are investigated using this model. The efficacy of the analytical model is evaluated by comparing the results with 3D finite element (FE) simulations of the D...
متن کاملMode I Failure of Laminated Polymeric Composites
A mechanical model for the prediction of mode I delamination failure of a laminated double cantilever beam (DCB) type specimen is presented. The volume of material ahead of the crack tip that experiences high stresses due to the presence of the crack tip was replaced by a nonlinear elastic spring foundation. The volume undergoing global deformation due to the external loading was replaced by a ...
متن کاملMode II Edge Delamination of Compressed Thin Films
Ceramic coatings deposited on metal substrates generally develop significant compressive stresses when cooled from the temperature at which they are processed as a result of thermal expansion mismatch. One of the main failure modes for these coatings is edge delamination. For an ideally brittle interface, the edge delamination of a compressed thin film involves mode II interface cracking. The c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Science and Technology
سال: 2019
ISSN: 0266-3538
DOI: 10.1016/j.compscitech.2019.03.019