Interaction between Silicon and Titanium in Molten Steel.
نویسندگان
چکیده
منابع مشابه
Direct electrochemical reduction of titanium-bearing compounds to titanium-silicon alloys in molten calcium chloride
Titanium-silicon alloys have been electrochemically extracted from the multi-component titanium compounds in molten calcium chloride electrolyte. Sintered pressed pellets of titanium-bearing compounds served as the cathode, and the electrochemical experiments were systematically carried out at 900 °C, 3.1 V and 1000 °C, 3.8 V using a graphite-based anode and an improved inert-oxygen-ion-conduct...
متن کاملThe Influence of Fluoride Anion on the Equilibrium between Titanium Ions and Electrodeposition of Titanium in Molten Fluoride–Chloride Salt
NaClKClTiClx was prepared via using titanium sponge to reduce titanium tetrachloride in a NaClKCl melt under a negative pressure at 1023K. The relationship between titanium valence states and [F]/[Ti] molar ratios was investigated with successive adding potassium fluoride in the pre-prepared NaClKClTiClx. It was found that the average valence of titanium ions tended to be stable around 3.0...
متن کاملDynamics of static friction between steel and silicon.
We conducted experiments in which steel and silicon or quartz are clamped together. Even with the smallest tangential forces we could apply, we always found reproducible sliding motions on the nanometer scale. The velocities we study are thousands of times smaller than in previous investigations. The samples first slide and then lock up even when external forces hold steady. One might call the ...
متن کاملFORMATION AND GROWTH OF TITANIUM ALUMINIDE LAYER AT THE SURFACE OF TITANIUM SHEETS IMMERSED IN MOLTEN ALUMINUM
Abstract: titanium sheets in pure molten aluminum at 750 and X-Ray Diffraction Analysis results, TiAlintermetallic layer thickness increases slowly at primary stages. After that an enhanced growth rate occurs due to layercracking and disruption. Presumably, reaction starts with solving titanium into the molten aluminum causing intitanium super saturation and TiAlintermetallic layer which conseq...
متن کاملInteraction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel
Strain induced precipitation in HSLA-100 steel was investigated by conducting hotcompression and relaxation tests at temperature range of 850°C to 1100°C and strain rate of 0.001s-1 to 1s-1. The absence of dynamic recrystallization at temperatures below 1000°C was attributedto the influence of dynamic precipitation. The stress relaxation tests showed that strain inducedprecipitation is possible...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2003
ISSN: 0915-1559
DOI: 10.2355/isijinternational.43.256