Interaction between depolarization effects, interface layer, and fatigue behavior in PZT thin film capacitors
نویسندگان
چکیده
منابع مشابه
PZT Thin-Film Meso- and Micro Devices
This paper consists of three major topics. The first topic is a review of challenges encountered in PZT thin film fabrication. Currently, sol-gel processing is one of the most promising techniques to fabricate PZT thin films. There are, however, several major challenges, including crack formation, thermally unstable electrodes, and poor piezoelectric properties. The second topic reveals some in...
متن کاملTHE THIN FILM CAPACITORS WITH AlN DIELECTRIC
The work is focused on thin film technologies especially on sputtering of dielectric thin film layers. The set of thin film capacitors was created on silica glass substrate. Aluminum electrodes of separated capacitors are deposited by method of vacuum evaporation. The AlN dielectric layer was prepared by reactive high frequency sputtering from aluminum target in nitrogen atmosphere. Dielectric ...
متن کاملEffects of corner frequency on bandwidth and resonance amplitude in designing PZT thin-film actuators
In the last decade, lead zirconate titanate oxide (PZT) thin-film actuators have received increasing attention because of their high frequency bandwidth, large actuation strength, fast response, and small size. The PZT film thickness is usually less than several microns as opposed to hundreds of microns for bulk PZT patches that are commercially available. As a result, PZT thin-film actuators p...
متن کامل3d Printing for Prototypes of Thin-film Pzt/polymer Microstructures
This work explores the viability of using 3D printing as a rapid-prototyping technique for microrobotic appendages made from thin-film PZT/polymer materials. First, the possibility of integrating piezoelectric materials into millimeter-scale (meso-scale) polymer melt-printed structures was investigated. Next, one specific robot limb geometry was chosen as a basis to compare structural modeling ...
متن کاملVibration Energy Harvesting with Pzt Thin Film Micro Device
A micro power generator for harvesting vibration energy by means of a piezoelectric laminated cantilever with inertial mass was designed, fabricated, and characterized. The device was micro machined from a silicon-on-insulator structure coated with a 2μm thick piezoelectric PZT thin film. Interdigitated electrodes (IDE) were applied to achieve higher voltages. A piezoelectric coupling constant ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Physics
سال: 2017
ISSN: 0021-8979,1089-7550
DOI: 10.1063/1.4992812