Intelligent Anti-virus Mask Based on Gas Detection Sensor
نویسندگان
چکیده
منابع مشابه
Couple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor
Micro/nanocantilevers have been employed as sensors in many applications including chemical and biosensing. Due to their high sensitivity and potential for scalability, miniature sensing systems are in wide use and will likely become more prevalent in micro/nano-electromechanical systems (M-NEMSs). This paper is mainly focused on the use of sensing systems that employ micro/nano-size cantilever...
متن کاملGas Sensor Based on Large Hollow-Core Photonic Bandgap Fiber
One concern in using photonic band-gap fiber (PBGF) as a gas sensor is the response time. In this type of the gas sensors, response time is the time required for gas to diffuse into the hollow-core. So considering a large hollow-core PBGF (HC-PBGF), the response time can be significantly reduced. But in the large HC-PBGF, the fundamental issue is the presence of higher order modes (HOMs). Somet...
متن کاملGas Detection Instrument Based on Wireless Sensor Networks
The wireless sensor network is used to simulate poisonous gas generating system in the Fire-Fighting Simulated Training System. In the paper, we use the wireless signal to simulate the poisonous gas source and use received signal strength indicator (RSSI) to simulate the distance between the fireman and the gas source. The gas detection instrument samples the temperature and sphygmus of the tra...
متن کاملPinhole Mask Sensor a Pinhole Mask Sensor
Figure 1 shows an example of a light field camera with a pinhole mask in front of the sensor. If we look at the sensor in 1D and assume an total x-resolution of 900 pixels and a Θ resolution of 9, the local x resolution is 100. The disadvantages are therefore a loss in resolution and a loss of light, as most of the light gets blocked by the mask. Therefore, while this model is very clean on a t...
متن کاملThe Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor
The pellet-type SnO2 sensor was synthesized by the solid state method and the effects of additives such as nano ZnO (1-12 mol %) and nano In2O3 (1-10 mol %) on the CO gas sensitivity of sensor were investigated. The optimum sintering temperature was chosen 800°C because of the porosity content of the samples. The phase analysis and microstructure of the samples were studied by x-ray diffraction...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2021
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1748/5/052035